DEV 14
Device Information
This page should have been created by making a link on DeviceID and clicking edit. That would suck in the contents from Template:DevTemplate as the boiler plate text for the volunteer to intake. There is an onlyinclude section where the very basic physical description of the device is contained. This gets pulled back into the DeviceID page so we only have to update the descriptions of the devices in one place. This may eventually include more helpful links
Location
Physical Description
Name and very short description
Black case
Intake
Components
Intake 9/6/14 CPU=2.5 GHz Pentium (R) Dual Core RAM=4096 MB Hard Drive=160 MB Graphics=Integrated
ARCH=donno MEMTYPE=donno SSE2_Support=donno
Peripheral Requirements
Not Specified
Work History
- Sign with a ~~~~ and write down what work you did.
- Installed LinuxCNC on this machine. Learned that the mach3 basically works with the ESS ethernet to parallel port card. LinuxCNC won't do this... but it would plug into the Parallel port and should work if settings were made to match.
- I believe they installed something else on it though
Discharge
Components
OS=Xubuntu