FCS Network: Difference between revisions
(Created page with "This page is about the network at FCS Various wireless network SSIDs exist there. The one we use for the Lab is FCSTMC-LAB1 and the password is on the whiteboard. Here i...") |
No edit summary |
||
| (5 intermediate revisions by 2 users not shown) | |||
| Line 1: | Line 1: | ||
[[Category:Infrastructure]] [[Category:Projects]] [[Category:Unfinished]] | |||
This page is about the network at [[FCS]] | This page is about the network at [[FCS]] | ||
=Wireless network= | |||
We have our own wireless ESSID in the lab. It is Freegeek / password Seattle iirc. | |||
Our netblock is 192.168.10.0/24 - if you have an IP address outside of this, then you're on the wrong network. Please let us know if this happens. | |||
=Wired Network= | |||
There are two Ethernet jacks in the lab room. One is under the table on the south wall, the other behind the table where the admin workstation sits. The other RJ-17 jacks in the room are telephone only. | |||
The Ethernet jack is connected to a 24-port Cisco switch on the same table. | |||
Please be careful of cables on the floor. It's a trip hazard! Please remember to clean up after your cabling, otherwise people can get hurt. | |||
Our subnet is firewalled from the FCS network. After all, we don't want to provide [[DHCP]] to the [[FCS]] network, that would be bad ;^). We need to provide [[DHCP]] on our own segment for [[Install Server]] to work. Also, a learning network with a firewall, services, etc. is something we will need. | |||
Latest revision as of 16:56, 27 February 2015
This page is about the network at FCS
Wireless network[edit]
We have our own wireless ESSID in the lab. It is Freegeek / password Seattle iirc.
Our netblock is 192.168.10.0/24 - if you have an IP address outside of this, then you're on the wrong network. Please let us know if this happens.
Wired Network[edit]
There are two Ethernet jacks in the lab room. One is under the table on the south wall, the other behind the table where the admin workstation sits. The other RJ-17 jacks in the room are telephone only.
The Ethernet jack is connected to a 24-port Cisco switch on the same table.
Please be careful of cables on the floor. It's a trip hazard! Please remember to clean up after your cabling, otherwise people can get hurt.
Our subnet is firewalled from the FCS network. After all, we don't want to provide DHCP to the FCS network, that would be bad ;^). We need to provide DHCP on our own segment for Install Server to work. Also, a learning network with a firewall, services, etc. is something we will need.